Study of Surface Tension Properties looked on Contact Angle Value on 100% Nylon Textile Fabric Using Corona Discharge Plasma Technology
Abstract
This paper provides an explanation of the application of corona discharge plasma in textile field specially for modification of surface properties and wet ability of nylon 100% fabric. In this research, we have found that the properties of wet ability of nylon 100% fabric with 70 / inch of weft density and 60/inch of warp density is influenced by corona discharged plasma analyzed by the contact angle of the fabric on capillarity phenomena under same test time for contact angle test.
Artikel ini menjabarkan pemanfaatan aplikasi teknologi plasma pijar korona pada bidang tekstil dalam modifikasi sifat pembasahan pada permukaan kain nilon 100% ditinjau dari sifat fenomena kapilaritas. Hasil riset memperlihatkan bahwa dengan perlakuan plasma pada kain nilon 100% dengan tetal pakan dan lusi masing-masing 70 helai/inci dan 60 helai/inci didapatkan bahwa terdapat perubahan sifat hidrofilik (dapat lebih mudah menyerap) kain melalui perubahan sudut kontak pada fenomena kapilaritas untuk waktu uji sudut kontak yang sama.
Full Text:
PDF (Bahasa Indonesia)References
Shishoo (2007), Plasma Technology For Textile, Woodhead Publishing, Cambridge.
Usman, A.S. (2012). Peningkatan Daya Saing Industri TPT Melalui Standarisasi, Makalah Seminar Nasional Tekstil, Bandung.
Yales, V. Kendalikan Konsumsi Energi Sektor Manufaktur. Surat Kabar KOMPAS, 18 April 2012, halaman 7
Kaiser, M., Baumgartner, K.-M., ¨
Schulz, A., Walker, M., and Rauchle, ¨
E. (1999) Linearly extended plasma
source for large-scale applications. Surf. Coat. Technol., 116-119, 552–557
Sjaifudin T.A.,Widodo, M., Muhlisin, Z., Nur, M. (2014). Modifikasi Permukaan Bahan Tekstil Dengan Plasma Lucutan Korona, Prosiding Seminar Nasional Tekstil, 1-22.
Rauscher, Perucca, Buyle (2010), Plasma Technology For Hyperfunctionals Surfaces, Wiley-VCH, Weinheim.
Lawrence, C A (2003), Fundamentals of Spun Yarn Technology, CRC Press, New York
Putra VGV, Dewanto A, Totong, (2016), Predicting Non Inertia Frame Related By Speed of Bobbin Compared by Speed of Rotor, Global Journal of Pure and Applied Mathematics, Vol 12.,No.5 pp. 4107-4114.
Putra VGV, Maruto, G & Rosyid, M.F.(2017), New theoretical modeling for predicting yarn angle on OE yarn influenced by fibre movement on torus coordinate based on classical mechanics approach, Indian Journal of Fibre and Textile Research, Vol.42. pp. 359-363.
F. F. Chen, (1984), Introduction to Plasma Physics and Controlled Fusion, vol. 1, New York: Plenum Press.
Lieberman, M & Lichtenberg, (1994), Principles of Plasma Discharges and Materials Processing, New York: John Wiley and Sons.
DOI: https://doi.org/10.17509/wafi.v5i1.22382
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Wahana Fisika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Wahana Fisika e-ISSN : 2549-1989 (SK no. 0005.25491989/JI.3.1/SK.ISSN/2017.02 ) published by Physics Program , Universitas Pendidikan Indonesia Jl. Dr.Setiabudhi 229 Bandung. The journal is indexed by DOAJ (Directory of Open Access Journal) SINTA and Google Scholar. Contact: Here
Lisensi : Creative Commons Attribution-ShareAlike 4.0 International License.