PENGEMBANGAN PROSEDUR PERHITUNGAN KEKUATAN STRUKTUR BETON BANGUNAN GEDUNG SEDERHANA MENURUT SNI 2847:2019

Sania Bilqisty Aulia Rahman

Abstract


This study intends to develop and test the feasibility of learning media for the procedure for calculating the strength of a simple building structure according to SNI 2847:2019 in the Construction Business Planning subject at the State Vocational High School 3 Yogyakarta with a suitable achievement target for use. The research method used is R&D with a 4D development model. Data collection techniques: observation and instruments. Observations were made to identify problems, determine drafts and learning indicators presented in the media. The instrument was carried out to obtain feasibility validation from material experts, media experts, and teachers of construction and property business planning subjects. The data analysis technique used qualitative descriptive analysis. The results are in the form of a procedure module for calculating the strength of a simple building structure according to SNI 2847:2019 with a material scope: load calculation, the strength of the slab and beam structure with reinforced concrete material. The results of validation by material experts, media experts, and teachers stated that the media was in the "very feasible" category with a material validation score of 264 (88% eligibility percentage) and 409 media validation (87% eligibility percentage).


Keywords


Structural, SNI 2847:2019, Construction Property Business Planning

Full Text:

PDF

References


Andi, P. (2015). Panduan kreatif membuat bahan ajar inovatif. Yogyakarta: Diva Press

Badan Standarisasi Nasional. (2017). SNI 2052:2017 baja tulangan beton. Jakarta: Badan Standarisasi Nasional

Badan Standarisasi Nasional. (2019). SNI 1726:2019 persyaratan beton struktural untuk bangunan gedung. Jakarta: Badan Standarisasi Nasional

Badan Standarisasi Nasional. (2019). SNI 2847:2019 tata cara perhitungan struktur beton untuk bangunan gedung. Jakarta: Badan Standarisasi Nasional

Badan Standarisasi Nasional. (2020). SNI 1727:2020 beban minimum untuk perancangan gedung dan struktur lain. Jakarta: Badan Standarisasi Nasional

Hariyanto, V. L dkk. (2008). Self-regulated learning with a module to improve learning achievement. Yogyakarta: Universitas Negeri Yogyakarta

Martubi. (2009). Peningkatan prestasi belajar matematika lanjut melalui pembelajaran menggunakan modul dan lembar kerja dengan latihan soal berjenjang. Yogyakarta: Universitas Negeri Yogyakarta

Sugiyono. (2016). Metode penelitian kuantitatif, kualitatif dan R&D. Bandung: PT. Alfabet

Thiagarajan, S., Semmel, D.D., & Semmelpp, M.I. (1974). Instructional development for training

teachers of exceptional children. Minnesotta: U.S. Office of Education

Widodo, S. (2008). Modul struktur beton 1. Yogyakarta: Universitas Negeri Yogyakarta. Jakarta: Media Abadi.




DOI: https://doi.org/10.17509/jptb.v2i1.45974

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Universitas Pendidikan Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Pendidikan Teknik Bangunan