Vertikal Accuracy Assessment On Sentinel-1, Alos Palsar, And Demnas In The Ciater Basin

Haikal Muhammad Ihsan, Sahid Sahid Sahid

Abstract


Vertical accuracy in DEM (Digital Elevation Model) products is very important for an earth study. There are medium resolution DEM data products that can be accessed freely such as DEMNAS, Alos Palsar 12.5m and Sentinel-1. The aim of this study is to measure the vertical accuracy of the DEMNAS, Alos Palsar 12.5m and Sentinel-1 data products by considering the slope angle classification and using two different GIS software. Vertical accuracy is measured using 848 spotheight points, by calculating the RMSE (Root Mean Square Error) value of each DEM product with different software. Based on the research, it was found that DEMNAS is a DEM product that has the best comparability value than Alos Palsar and Sentinel-1, because it has the smallest RMSE value. Slope angle class gives different values of bias against absorption and reflection of electro magnetic waves. Flat to moderate steep slope angles tend to be better at absorbing and reflecting electromagnetic waves. Perbedaan software dalam analisis tidak terlalu mempengaruhi ketinggian titik tinggi DEM dan RMSE. The spotheight point needs to be reaccurated with a more detailed geodetic point, to get maximum results.


Keywords


DEMNAS, Alos Palsar, Sentinel-1, Vertical Accuracy

Full Text:

PDF

References


O, I, Apeh. V, N, Uzodinma. E, S, Ebinne. E, C, Moka. & E, U, Onah., (2019). Accuracy Assessment of Alos W3d30, Aster Gdem and Srtm30 Dem: A Case Study of Nigeria, West Africa. Journal of Geographic Information system, Vol, 11. pp, 111-123. DOI: 10.4236/jgis.2019.112009

K, Zhanga. D, Gannc. M, Rossa. Q, Robertsone. J, Sarmientob. S, Santanac. J, Rhomef. & C, Fritzf., (2019). Accuracy assessment of ASTER, SRTM, ALOS, and TDX DEMs for Hispaniola and implications for mapping vulnerability to coastal flooding. Remote sensing of Environment. Vol, 225. pp, 290-306. https://doi.org/10.1016/j.rse.2019.02.028.

U, Alganci. B, Besol & E, Sertel., (2018). Accuracy Assessment of Different Digital Surface Models. International Journal of Geo-Information. Vol, 7. pp. 114. https://doi.org/10.3390/ijgi7030114.

K, Gdulová. J, Marešová. & V, Moudrý., (2020). Accuracy assessment of the global TanDEM-X digital elevation model in a mountain environment. Remote sensing of environment. Vol, 241. pp, 111724. https://doi.org/10.1016/j.rse.2020.111724.

S, Wang. Z, Ren. C, Wu. Q, Lei. W, Gong. Q, Ou. H, Zhang. G, Ren. & C, Li., (2019). DEM generation from Worldview-2 stereo imagery and vertical accuracy assessment for its application in active tectonics. Geomorphology. 336, 107-118. https://doi.org/10.1016/j.geomorph.2019.03.016

A, Pope. T, Murray. & A, Luckman., (2007). DEM quality assessment for quantification of glacier surface change. Annals of Glaciology. Vol, 46. pp, 198-194. DOI: https://doi.org/10.3189/172756407782871792

A, Soliman. & L, Han., (2019). Effects of vertical accuracy of digital elevation model (DEM) data on automatic lineaments extraction from shaded DEM. Advances in Space Research, Vol, 64. pp, 603-622. https://doi.org/10.1016/j.asr.2019.05.009

S, Mukherjee. P, K, Joshi. S, Mukherjee. A, Ghosh. R, D, Garg. & A, Mukhopadhyay. (2013). Evaluation of vertical accuracy of open source Digital Elevation Model (DEM). International Journal of Applied Earth Observation and Geoinformation. Vol, 21. pp, 205-217. https://doi.org/10.1016/j.jag.2012.09.004.

I, I, Ajibola. S, Mansor. B, Pradhan. & H, Z, Mohd. Shafri., (2019). Fusion of UAV-based DEMs for vertical component accuracy improvement. Measurement. Vol, 147. pp, 106795. https://doi.org/10.1016/j.measurement.2019.07.023

M, Lazeckýa. I, Hlaváčováb. J, Martinoviča. & A, M, RuizArmenteros. (2018). Accuracy of Sentinel-1 Interferometry Monitoring System based on Topography-free Phase Images. Procedia Computer Science. Vol, 138, pp 310-317. https://doi.org/10.1016/j.procs.2018.10.044.

A, mohammadi. B, B, Ahmad. H, Shahabi. (2018). Extracting Digital Elevation Model (Dem) From Sentinel-1 Satellite Imagery: Case Study A Part Of Cameron Highlands, Pahang, Malaysia. International Journal of Management and Applied Science, ISSN: 2394-7926. Vol 4. Issue 9. http://iraj.in

Zuidam, R.A. Van., 1985. Aerial Photo-Interpretation Terrain Analysis and Geomorphology Mapping. Smith Publisher The Hague.

J, Chen. F, Günther. G, Grosse. L, Liu. and H, Lin. (2018). Sentinel-1 InSAR Measurements of Elevation Changes over Yedoma Uplands on Sobo-Sise Island, Lena Delta. Remote Sensing, MDPI, vol 10. p 1152. https://doi.org/10.3390/rs10071152.

A, Schubert. D, Small. N, Miranda. D, Geudtner. and E, Meier. (2015). Sentinel-1A Product Geolocation Accuracy: Commissioning Phase Results. Remote Sensing, MDPI. vol 7, pp 9431-9449. doi:10.3390/rs70709431




DOI: https://doi.org/10.17509/gea.v21i1.29931

DOI (PDF): https://doi.org/10.17509/gea.v21i1.29931.g14619

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Haikal Muhammad Ihsan, Sahid Sahid Sahid

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.