Studi Awal Sintesis Dan Karakterisasi Tinta Konduktif Berbasis Grafit Pensil Untuk Aplikasi Sensor Suhu

Siti Aisyah, Romi Fadli Syahputra, Delovita Ginting

Abstract


This preliminary study aims to synthesize and characterize pencil graphite-based conductive ink for temperature sensor applications. The ink was prepared by adding Polyvinyl Alcohol (PVA) and Sodium Carboxymethyl Cellulose (NaCMC) polymers into graphite powder dispersed in deionized water, and then applied onto glossy paper with varied compositions. Characterization was carried out using Fourier Transform Infrared Spectroscopy (FTIR), Ultraviolet–Visible Spectroscopy (UV-Vis), sheet resistance measurements, and a Vector Network Analyzer (VNA). FTIR results indicated functional group interactions between graphite and the polymers, while UV-Vis analysis showed a decrease in the band gap to 2.02 eV in the GP3 sample. The sheet resistance test revealed that GP3 had the lowest resistance of 4.97 kΩ/cm² and the highest conductivity of 484.2 S/cm. VNA measurements confirmed that the sensor operated stably at specific frequencies and was responsive to temperature changes. Based on these results, pencil graphite-based conductive ink with PVA and NaCMC demonstrates potential for use as a flexible and low-cost temperature sensor candidate.

References


Camargo, J. R., Orzari, L. O., Araújo, D. A. G., de Oliveira, P. R., Kalinke, C., Rocha, D. P., Luiz dos Santos, A., Takeuchi, R. M., Munoz, R. A. A., Bonacin, J. A., & Janegitz, B. C. (2021). Development of conductive inks for electrochemical sensors and biosensors. Microchemical Journal, 164(February). https://doi.org/10.1016/j.microc.2021.105998

Dey, A., Kalita, A. J., Khatun, H., & Sarma, U. (2025). The Development of an Affordable Graphite-Based Conductive Ink for Printed Electronics. Engineering Proceedings, 87(1), 17. https://doi.org/10.3390/ecsa-9-07880

Gong, X., Zhang, L., Huang, Y., Wang, S., Pan, G., & Li, L. (2020). Directly writing flexible temperature sensor with graphene nanoribbons for disposable healthcare devices. RSC Advances, 10(37), 22222–22229. https://doi.org/10.1039/d0ra02815k

Jubu, P. R., Danladi, E., Ndeze, U. I., Adedokun, O., Landi, S., Haider, A. J., Adepoju, A. T., Yusof, Y., Obaseki, O. S., & Yam, F. K. (2024). Comment about the use of unconventional Tauc plots for bandgap energy determination of semiconductors using UV–Vis spectroscopy. Results in Optics, 14(1), 100606.https://doi.org/10.1016/j.rio.2024.100606

Ji, H., Liu, Q., Zhang, Y., & Wang, S. (2021). Water-based graphite conductive inks with enhanced stability for printed flexible electronics. Carbon, 183, 907–916.https://doi.org/10.1016/j.carbon.2021.07.020

Lee, D., & Kim, S. (2022). Development of carbon-based conductive ink for low-cost printed temperature sensors. Sensors and Actuators A: Physical, 338, 113468.https://doi.org/10.1016/j.sna.2022.113468

Liew, Q. J., Aziz, A. S. A., Lee, H. W., Lee, M. W., Hawari, H. F., & Md Khir, M. H. (2020). Inkjet-Printed Flexible Temperature Sensor Based on Silver Nanoparticles Ink †. Engineering Proceedings, 2(1), 2–7. https://doi.org/10.3390/ecsa-7-08216

Nathani, A., Vishnu, N., & Sharma, C. S. (2020). Review—Pencil Graphite Electrodes as Platform for Enzyme and Enzyme-Like Protein Immobilization for Electrochemical Detection. Journal of The Electrochemical Society, 167(3), 037520.https://doi.org/10.1149/2.0202003JES

Park, J., Oh, S., & Yun, J. (2022). Printed graphite electrodes for low-cost temperature and strain sensing applications. Materials Today Communications, 33, 104570. https://doi.org/10.1016/j.mtcomm.2022.104570

Rahman, M. A., Singha, S. I., & Sarker, P. (2023). Mechanical and electrical behavior of PVA/CMC-based composite films for flexible electronics. Journal of Applied Polymer Science, 140(12), e53381. https://doi.org/10.1002/app.53381

Sekertekin, Y., Bozyel, I., & Gokcen, D. (2020). A Flexible and Low-Cost Tactile Sensor Produced by Screen Printing of Carbon Black/PVA Composite on Cellulose Paper. Sensors, 20(10), 2908. https://doi.org/10.3390/s20102908

Soni, M., Watson, T., Greenwood, P., & Tabrizian, M. (2021). Eco-friendly water-based carbon inks for printed flexible electronics. ACS Applied Materials & Interfaces, 13(4), 5678–5688.https://doi.org/10.1021/acsami.0c21044

Xie, Z., Ventura, H., & Ardanuy, M. (2024). A Review of the Electrical Conductivity Test Methods for Conductive Fabrics. Textiles, 4(3), 284–308. https://doi.org/10.3390/textiles4030017

Xu, Y., Zhao, G., Zhu, L., Fei, Q., Zhang, Z., Chen, Z., An, F., Chen, Y., Ling, Y., Guo, P., Ding, S., Huang, G., Chen, P.-Y., Cao, Q., & Yan, Z. (2020). Pencil–paper on-skin electronics. Proceedings of the National Academy of Sciences, 117(31), 18292–18301. https://doi.org/10.1073/pnas.2008422117

Zikulnig, J., Roshanghias, A., Rauter, L., & Hirschl, C. (2020). Evaluation of the Sheet Resistance of Inkjet-Printed Ag-Layers on Flexible, Uncoated Paper Substrates Using Van-der-Pauw’s Method. Sensors, 20(8), 2398. https://doi.org/10.3390/s20082398




DOI: https://doi.org/10.17509/wafi.v10i2.89766

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Wahana Fisika

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Wahana Fisika e-ISSN : 2549-1989 (SK no. 0005.25491989/JI.3.1/SK.ISSN/2017.02 ) published by Physics Program ,  Universitas Pendidikan Indonesia Jl. Dr.Setiabudhi 229 Bandung. The journal is indexed by DOAJ (Directory of Open Access Journal) SINTA and Google Scholar. Contact: Here

Creative Commons License Lisensi : Creative Commons Attribution-ShareAlike 4.0 International License.

View My Stats>View Stats