PENGARUH MOTIVASI BERPRESTASI TERHADAP KESIAPAN BELAJAR, PELAKSANAAN PRAKERIN DAN PENCAPAIAN KOMPETENSI MATA PELAJARAN PRODUKTIF

Rudy Fatchurrohman

Abstract


This study aims to define the factors that influence the achievement of productive subjects competence in TKR (Light Vehicle Engineering), describe the achievement motivation, learning readiness, and Prakerin or OJT (On Job Training) implementation in connection with the achievement of productive subjects, to determine the effect of achievement motivation on learning readiness and OJT implementation, and to determine the effect of learning readiness and OJT implementation on the competence achievement of productive TKR subjects. The calculation results of correlation and coefficient of determination show that achievement motivation correlates to learning readiness by 0,875, and to OJT implementation by 0,678. Learning readiness correlates to competence achievement of productive subjects by 0,392; OJT implementation correlates to the competence achievement of productive subjects by 0,381; while learning readiness and OJT implementation are correlated by 0,418. The study concludes that there is a significant correlation between achievement motivation, learning readiness and OJT implementation, and therefore there is a need to enhance students’ motivation, especially achievement motivation, so that students’ can have better level of learning readiness and OJT implementation

Full Text:

PDF

References


Bailey. T, et al. (2004). Working Knowledge: Work Based Learning and Education Reform. New York: Routledge Falmer.

Depdiknas, (2003), Pedoman Pelaksanaan Praktek Kerja Industri (SMK). Jakarta: DPMK.

Dimyati, dan Mudjiono. (2002). Belajar dan Pembelajaran. Jakarta: PT. Rineka Cipta

Direktorat Dikmenjur. (2006). Buku Kurikulum SMK Edisi 2006. Jakarta: DPMK

Direktorat Jenderal Pendidikan Menengah Kejuruan. (2002). Sejarah Pendidikan Teknik dan Kejuruan di Indonesia: Membangun Manusia Produktif. Jakarta: Depdiknas.

Djamarah, Syaeful. (2002). Prestasi Belajar dan Kompetensi Guru. Jakarta: Usaha Nasional.

Djojonegoro, W. (1998). Pengembangan Sumber Daya Manusia: Melalui Sekolah Menengah Kejuruan. Jakarta: Depdikbud.

Direktorat Dikmenjur. (2004). Kurikulum Teknik Mekanik Otomotif Edisi 2004. Jakarta: Depdiknas.

Evarinayanti. (2002). Pelatihan Berbasis Kompetensi (Competency Based Training). Jakarta: Depdiknas.

Fudyartanto, Ki. (2002). Psikologi Pendidikan dengan Pendekatan Baru. Yogyakarta: Global Pustaka Ilmu.

Hamalik, Oemar. (2004). Proses Belajar Mengajar. Jakarta: PT Bumi Aksara

Mulyasa, E. (2004). Kurikulum Berbasis Kompetensi Konsep, Karakteristik dan Implementasi. Bandung: PT. Remaja Rosdakarya.

Mulyasa, E. (2005). Implementasi Kurikulum 2004, Panduan Pembelajaran KBK. Bandung: PT Remaja Rosdakarya.

Siregar, Evaline dan Nara, Hartini (2010), Teori Belajar dan Pembelajaran. Bogor: Ghalia Indonesia.

Sukmadinata, N.S. (2001). Pengembangan Kurikulum Teori dan Praktek. Bandung: PT Remaja Rosdakarya.

Sukmadinata, N.S. (2004). Kurikulum dan Pembelajaran Kompetensi. Bandung: Yayasan Kesuma Karya

Uno, B. Hamzah. (2010). Teori Motivasi dan Pengukurannya. Jakarta: PT. Bumi Aksara.




DOI: https://doi.org/10.17509/invotec.v7i2.6292

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Innovation of Vocational Technology Education



This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.

Lisensi Creative Commons
This work is licensed under a Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.

View My Stats