DESIGN OF SPECIAL SERVICE TOOLS (SST) MOTORCYCLE TIMING GEAR

Agus Haris Abadi, Azhis Sholeh Buchori

Abstract


The purpose of designing the special service tools (SST) for motorcycle timing gear is to make it easier for mechanics to carry out the process of removing the motorcycle timing gear. The process of making this tool is carried out in several stages, including the selection of materials and the manufacturing process. The material used is S30C steel because this material has a maximum tensile strength of 48 Kg/mm. The tools used in the manufacturing process include lathes, drilling machines, grinders, saws, files, vise, hacksaws, steel rulers, pins, key sets. The measurement of the material to be used is attempted as accurately as possible in order to obtain the best results. After the required materials are available, then work on the machine tools is carried out. After this stage is complete then proceed with the finishing process. The test results show that with this tool the process of removing the timing gear on the crankshaft only takes 35.26 seconds and avoids damage to the components. The bending stress that occurs in the turning rod is still below the allowable, which is about 6.32 kg/mm. The shear stress that occurs at the hook eye is also still below the allowable, which is about 0.105 kg/mm2. The torsional stress on the pressing bolt is 0.11 kg/mm2 which is still below the allowable 4.8 kg/mm2. The root shear stress on the pressing bolt is still below the allowable, which is about 0.016 kg/mm. The root shear stress on the hook eye is still below the allowable, which is about 0.013 kg/mm. The tensile stress on the thread that occurs in the pressure bolt is still below the allowable tensile stress on the thread on the bolt, which is 0.26 Kg/mm2. The tensile stress on the thread that occurs at the hook eye is still below the allowable, which is about 0.055 kg/mm2. The tensile stress that occurs in the towing pipe is still below the allowable, which is about 0.038 kg/mm. Based on this, overall the tool is safe to use

Keywords


timing gear, SST, motorcycle

Full Text:

PDF

References


Abadi, A. H. (2020). Manufaktur alat peraga aliran fluida di dalam pipa modul tambahan. Jurnal Ilmiah Ilmu dan Teknologi Rekayasa, 2(2), 85-91.

Abadi, A. H., & Buchori, A. S. (2020). Design of special service tools (SST) motorcycle timing gear. Jurnal Ilmiah Ilmu Dan Teknologi Rekayasa, 8(2), 22-30.

Abadi, A. H., Suhartono, R., Efendi, A., & Pratama, R. A. (2021). Analysis of variable valve timing intelligent mechanism of gasoline performance. Journal of Physics. 1833(1), 1-8.

Abikusna, S., & Haryadi, R. A. (2020). Mempercepat proses dan meningkatkan safety pemasangan roda dengan sst little helper di bengkel auto 2000 XXX. Jurnal Technologic, 10(2), 8-12.

Amir, M., & Rahman, A. (2020). Analisis dampak transportasi online terhadap transportasi konvensional (bentor) di Kota Makassar. Jurnal Mirai Management, 5(1), 313-329.

Handayani, E. N., & Pratama, E. Y. (2018). Pengaruh manajemen hubungan pelanggan terhadap kepuasan konsumen. Jurnal Manajemen Bisnis Krisnadwipayana, 6(3), 1-9.

Holik, H., Mujianto, H., & Rubiono, G. (2016). Rancang bangun sistem pengapian semi elektronik double trigger sebagai pengembangan sistem pengapian konvensional. V-MAC (Virtual of Mechanical Engineering Article), 1(1), 14-21.

Ismiyati, I., Marlita, D., & Saidah, D. (2014). Pencemaran udara akibat emisi gas buang kendaraan bermotor. Jurnal Manajemen Transportasi & Logistik (JMTransLog), 1(3), 241-248.

Novianto, W., & Santoso, Y. (2018). Analisa dan perancangan sistem informasi bengkel pada bengkel lancar motor. IDEALIS: InDonEsiA journaL Information System, 1(5), 57-63.

Purnomo, D., Sutrisno, S., & Hidayat, T. (2020). Rancang bangun alat pelepas dan pemasangan gear cam sproket primer pada sepeda motor (studi kasus pada yamaha vega–r). JURNAL CRANKSHAFT, 3(2), 7-14.

Ramadina, S., & Hadi, S. (2015). Pengembangan sistem informasi manajemen bengkel kerja sekolah menengah kejuruan. Jurnal Pendidikan Vokasi, 5(1), 103-116.

Ridwan, M., Suhar, A. M., Ulum, B., & Muhammad, F. (2021). Pentingnya penerapan literature review pada penelitian ilmiah. Jurnal Masohi, 2(1), 42-51.

Rohmadi, M. (2020). Manajemen bengkel kriya kulit dalam upaya pengembangan mutu pembelajaran di SMK. Media Manajemen Pendidikan, 3(1), 42-54.

Setia Abikusna, R. R. (2020). Mempercepat lead time proses penggantian v-belt mesin nr toyota dengan sst di bengkel auto 2000 XXX. Jurnal Technologic, 11(1), 1–9.

Simatupang, J., & Gomal Juni Yanris, S. (2020). Implementasi sistem informasi booking service online pada pt. riau argo perkasa berbasis web. Jurnal Intra Tech, 4(2), 69-80.

Sutrisno, M. R., Noor, R. A. M., & Sumarna, N. (2019). Studi ketersediaan special service tool pada paket keahlian teknik kendaraan ringan di SMK. Journal of Mechanical Engineering Education, 5(2), 210-214.

Van Harling, V. N., & Urbata, A. (2020). Pengaruh variasi penyetelan katup terhadap putaran pada engine stand motor bensin. Jurnal Pendidikan Teknik Mesin Undiksha, 8(2), 79-85.

Zahari, M. (2018). Analisis permintaan sepeda motor di kota Jambi. Jurnal Ilmiah Universitas Batanghari Jambi, 11(1), 7-11.

Zulkarnain Fatoni, & Sukarmansyah. (2018). Perencanaan alat bantu untuk memasang torak (piston installer). Jurnal Desiminasi Teknologi, 6(1), 1-94.




DOI: https://doi.org/10.17509/jmee.v8i2.40927

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Journal of Mechanical Engineering Education

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 Indexed by:

          

 

   

ISSN: P 2356-4997

         E 2715-4734

 

View My Stats