DEVELOPING A BEST PRACTICE-BASED OCCUPATIONAL SAFETY AND HEALTH MODULE FOR VOCATIONAL STUDENTS

Bofit Osbron Randyputra; Ahmad Eko Suryanto; Ratna Pancawati

doi:10.17509/jmee.v12i2.87792

DEVELOPING A BEST PRACTICE-BASED OCCUPATIONAL SAFETY AND HEALTH MODULE FOR VOCATIONAL STUDENTS

Bofit Osbron Randyputra, Ahmad Eko Suryanto, Ratna Pancawati

Abstract

This study aims to develop a best practice-based Occupational Safety and Health teaching module and evaluate its feasibility for vocational students in Light Vehicle Engineering. This research employed the Research and Development method with an ADDIE model (Analysis, Design, Development, Implementation, Evaluation). The subjects included a material expert (vocational teacher), a media expert (instructional media lecturer), and 35 students. Data were collected using expert validation questionnaires and student response surveys with a Likert scale, then analyzed using quantitative descriptive statistics. The results indicated high feasibility in content, with the material expert validation reaching 82.67% (Very Feasible) and student responses scoring 84.57% (Very Feasible). The findings highlight that the module's content is highly relevant and contextually beneficial for students. However, the media expert validation only scored 65.33% (Feasible), indicating significant weaknesses in visual design, graphics quality, and layout. This study concludes that for vocational students, the relevance and practical utility of content are more dominant factors in the acceptance of a teaching module than its aesthetic appeal. Nevertheless, improvements in media design are necessary to achieve optimal learning effectiveness.

Keywords

Best Practice; Occupational Safety and Health; Research and Development.

Full Text:

PDF (Indonesian)

References

Abdul Karim, Z. I., & Maat, S. M. (2019). Employability skills model for engineering technology students. Journal of Technical Education and Training, 11(2), 079–087. https://doi.org/10.30880/jtet.2019.11.02.008

AlQallaf, N., Elnagar, D. W., Aly, S. G., Elkhodary, K. I., & Ghannam, R. (2024). Empathy, education, and awareness: a vr hackathon’s approach to tackling climate change. Sustainability, 16(6), 1–16. https://doi.org/10.3390/su16062461

Amani, F. I., Bahar, A., Widagdo, A. K., & Sulandari, L. (2024). Pengembangan media pembelajaran flipbook berbasis kontekstual pada materi keselamatan kerja. Jurnal Ilmiah Profesi Pendidikan, 9(3), 1631–1636. https://doi.org/10.29303/jipp.v9i3.2429

Angga, R. U. D. A. R. W. (2022). Differences in students’ mathematical communication ability and self-efficacy between open ended and contextual learning approach. Journal of Education and Practice, 13(7), 19–25. https://doi.org/10.7176/JEP/13-7-03

Asrianti Askar, Hidayat, & Andi Sani. (2022). Hubungan implementasi program K3 terhadap produktivitas kerja pada pekerja di pt. industri kapal Indonesia. Window of Public Health Journal, 3(4), 680–689. https://doi.org/10.33096/woph.v3i4.435

Aulia, F., Murtinugraha, R. E., & Saleh, R. (2024). Analisis kebutuhan untuk pengembangan video animasi pembelajaran TPACK pada mata kuliah K3 di Universitas Negeri Jakarta. Jurnal Teknologi Pendidikan, 1(3), 1–8. https://doi.org/10.47134/jtp.v1i3.311

Blaschke, L. M. (2012). Heutagogy and lifelong learning: A review of heutagogical practice and self-determined learning. The International Review of Research in Open and Distributed Learning, 13(1), 56–71. https://doi.org/10.19173/irrodl.v13i1.1076

Cahyadi, R. A. H. (2019). Pengembangan bahan ajar berbasis addie model. Halaqa: Islamic Education Journal, 3(1), 35–42. https://doi.org/10.21070/halaqa.v3i1.2124

Diah Sarasanty, Nizar Zulfika, D., Tri Asmorowati, E., Sholikhah, F., & Bashiroh, A. (2025). Peningkatan kompetensi manajemen K3 konstruksi sebagai upaya pencapaian karakter budaya mutu pada siswa SMK. Nusantara Jurnal Pengabdian Kepada Masyarakat, 5(2), 249–258. https://doi.org/10.55606/nusantara.v5i2.4770

Freeman, S., Eddy, S. L., McDonough, M., Smith, M. K., Okoroafor, N., Jordt, H., & Wenderoth, M. P. (2014). Active learning increases student performance in science, engineering, and mathematics. Proceedings of the National Academy of Sciences, 111(23), 8410–8415. https://doi.org/10.1073/pnas.1319030111

Gazali, R. Y., & Atsnan, Muh. F. (2022). Implementation of contextual approach as meaningful mathematics learning. Jurnal Inovasi Pembelajaran Matematika, 1(1), 9–15. https://doi.org/10.56587/jipm.v1i1.7

Lam, S., Jimerson, S., Wong, B. P. H., Kikas, E., Shin, H., Veiga, F. H., Hatzichristou, C., Polychroni, F., Cefai, C., Negovan, V., Stanculescu, E., Yang, H., Liu, Y., Basnett, J., Duck, R., Farrell, P., Nelson, B., & Zollneritsch, J. (2014). Understanding and measuring student engagement in school: The results of an international study from 12 countries. School Psychology Quarterly, 29(2), 213–232. https://doi.org/10.1037/spq0000057

Nugraha, H. D., Kencanasari, R. A. V., Komari, R. N., & Kasda, K. (2020). Employability skills in Technical Vocational Education and Training (TVET). Innovation of Vocational Technology Education, 16(1), 1–10. https://doi.org/10.17509/invotec.v16i1.23509

Parman, P., Sugiarto, S., Yansah, D., & Ardini, R. (2025). Peningkatan pemahaman keselamatan dan kesehatan kerja melalui pelatihan risk assessment pada siswa SMK Al Irsyad. Jurnal Kreativitas Pengabdian Kepada Masyarakat (PKM), 8(9), 4269–4280. https://doi.org/10.33024/jkpm.v8i9.20943

Parsaoran Tamba, & Hendro M. Sumual. (2023). The influence of hard skills K3, soft skills and work environment on the behavior of implementing K3 in welding practices of mechanical engineering study program students in vocational high schools in north Sulawesi. Technium: Romanian Journal of Applied Sciences and Technology, 16(1), 417–423. https://doi.org/10.47577/technium.v16i.10021

Priyadi, A., Firdausia, F., & Effendi, M. I. (2024). Pengembangan media pembelajaran slamettica dalam materi berperilaku Kesehatan dan Keselamatan Kerja (K3) pada mata pelajaran dasar-dasar teknik ketenaga listrikan siswa SMK. Didaktika: Jurnal Pendidikan, 13(4), 4753–4766.https://doi.org/https://doi.org/10.58230/27454312.1094

Purwanti, B. S. R., Ihsan Auditia Akhinov, & Hasvienda M. Ridlwan. (2025). Perancangan modul ajar penggunaan sein dan lampu hazard untuk media peningkatan kompetensi siswa. Mitra Akademia: Jurnal Pengabdian Masyarakat, 8(1), 41–48. https://doi.org/10.32722/mapnj.v8i1.7183

Puspita Sari, W., Rezka Fedrina, Abdul Kholik, & Fajar Rizki, M. (2023). Optimalisasi penerapan Keselamatan, Kesehatan Kerja (K3) Laboratorium di intansi pendidikan melalui kegiatan komunikasi. Artinara, 2(2), 93–101. https://doi.org/10.36080/art.v2i2.100

Ratih, R. A. (2025). Penerapan sistem manajemen K3 di bengkel las SMK YP Gajah Mada Palembang. Edutech, 24(2), 1116–1124. https://doi.org/10.17509/e.v24i2.83381

Rohmatika, A. N., & Sudira, P. (2025). A systematic review: habituation of industrial work culture in supporting the employability of vocational students in the field of engineering technology. International Journal of Research and Innovation in Social Science, 9(7), 338–353. https://doi.org/10.47772/IJRISS.2025.90700025

Santoso, A. B. (2021). Pengembangan media pembelajaran berbasis web menggunakan prinsip mayer pada mata pelajaran pemrograman web dinamis untuk siswa SMK jurusan rekayasa perangkat lunak. Irfani, 16(2), 41–49. https://doi.org/10.30603/ir.v16i2.1905

Siagian, H. (2012). Integrasi etika bisnis dalam manajemen keselamatan dan kesehatan kerja. Jurnal Wira Ekonomi Mikroskil, 2(1), 31–38. https://doi.org/10.55601/jwem.v2i1.66

Sudarni, A. A. C., Sari, R. N., Hayati, K. R., & Tranggono. (2023). Analisis dampak program Kesehatan dan Keselamatan Kerja (K3) terhadap penurunan kecelakaan kerja di industri konstruksi. Waluyo Jatmiko Proceeding, 16(1), 331–340. https://doi.org/10.33005/wj.v16i1.40

Swatika, B., Wibowo, P. A., & Abidin, Z. (2022). Pengaruh Keselamatan dan Kesehatan Kerja (K3) terhadap produktivitas kerja karyawan. Jurnal Ilmu Kesehatan Masyarakat, 11(02), 197–204. https://doi.org/10.33221/jikm.v11i02.1220

Wafiq Azizah, Mansur Sididi, Nurul Ulfah Mutthalib, & Een Kurnaesih. (2024). Pengaruh keselamatan dan kesehatan kerja terhadap produktivitas perawat RSUP DR. Tadjuddin Chalid Makassar. Window of Public Health Journal, 5(1), 9–17. https://doi.org/10.33096/woph.v5i1.1558

Widiana, I. W., Muka, I. W., & Sri Mahapatni, I. A. P. (2023). Pengaruh penerapan Keselamatan dan Kesehatan Kerja (K3) terhadap produktivitas dan kenyamanan pekerja konstruksi. Jurnal Ilmiah Kurva Teknik, 12(2), 121–131. https://doi.org/10.36733/jikt.v12i2.7605

Widyawati, N. K. (2021). Pentingnya penguasaan konsep Keselamatan Dan Kesehatan Kerja (K3) dalam mendukung kinerja calon lulusan pendidikan kejuruan di dunia kerja. Jurnal BOSAPARIS: Pendidikan Kesejahteraan Keluarga, 11(3), 87–93. https://doi.org/10.23887/jjpkk.v11i3.30675

Wuni, C., Berliana, N., & Murfi, A. C. (2024). Sosialisasi budaya Keselamatan Dan Kesehatan (K3) di sekolah pada siswa SMK kesehatan kota Jambi. Logista - Jurnal Ilmiah Pengabdian Kepada Masyarakat, 8(1), 11–15. https://doi.org/10.25077/logista.8.1.11-15.2024

Ye, C., Yao, D., & Yu, Q. (2023). Research on the reconstruction of curriculum system in vocational undergraduate education—a case study of early childhood education major. Advances in Vocational and Technical Education, 5(9), 23–30. https://doi.org/10.23977/avte.2023.050904

Zhang, M., & Wang, Y. (2021). The problems of developing school-enterprise cooperation in vocational education under the background of deepening the integration of industry and education. In 2021 6th International Conference on Social Sciences and Economic Development (ICSSED 2021) (pp. 859-863). Atlantis Press. https://doi.org/10.2991/assehr.k.210407.162

Zuniawati, D. (2023). Penerapan kecelakaan nihil melalui metode penyuluhan Keselamatan dan Kesehatan Kerja (K3) di sekolah menengah kejurusan X. Community Reinforcement and Development Journal, 2(2), 17–20. https://doi.org/10.35584/reinforcementanddevelopmentjournal.v2i2.145

DOI: https://doi.org/10.17509/jmee.v12i2.87792