Effects of Moisture Content and Grain Type on Mechanical Properties of White Rice: Literature review and Experiment
Abstract
Keywords
Full Text:
PDFReferences
Abasi, S., and Minaei, S. (2014). Effect of drying temperature on mechanical properties of dried corn. Drying Technology: An International Journal, 32(7), 774-780.
Akhtar, K., Khan, S. A., Khan, S. B., and Asiri, A. M. (2018). Scanning electron microscopy: Principle and applications in nanomaterials characterization. Handbook of Materials Characterization, 2, 113-145.
Altuntas, E., and Yildiz, M. T. (2007). Effect of moisture content on some physical and mechanical properties of faba bean (Vicia faba L.) grains. Journal of Food Engineering, 78, 174-183.
Altuntaş, E., Gul, E. N., and Bayram, M. (2013). The physical, chemical and mechanical properties of medlar (Mespilus germanica L.) during physiological maturity and ripening period. Journal of Agricultural Faculty of Gaziosmanpasa University, 30(1), 33-40.
Anggraeni S., Nandiyanto, A. B. D., Hofifah, S. N., Sitanggang, J. E., Latifah, N. Z., Sopian, O., Saputra, Z. (2022b). effect of biomass comparison of rice straw and eggshell in a porous concrete mixture. Journal of Engineering Science and Technology, 17(3), 1857 – 1866.
Anggraeni, S., Anshar, A. N., Maulana, A., Nurazizah, S., Nurjihan, Z., Putri, S. R., and Nandiyanto, A. B. D. (2022a). Mechanical properties of sawdust and rice husk brake pads with variation of composition and particle size. Journal of Engineering Science and Technology, 17(4). 2390 – 2401.
Anshar, A. M., Taba, P., and Raya, I. (2016). Kinetic and thermodynamics studies on the adsorption of phenol on activated carbon from rice husk activated by ZnCl2. Indonesian Journal of Science and Technology, 1(1), 47-60.
Anthony, M. C., Teng, P., Lassa, J., Nair, T., and Shrestha, M. (2016). Public stockpiling of rice in Asia Pacific. NTS Report, 3, 1-61.
Babic, L., Radojčin, M., Pavkov, I., Turan, J., Babic, M., and Zoranović, M. (2011). Physical properties and compression loading behaviour of corn (Zea mays l.) seed. Journal on Processing and Energy in Agriculture, 15(3), 118-126.
Bagheri, I., Dehpour, M. B., Payman, S. H., and Zareiforoush, H. (2011). Rupture strength of brown rice varieties as affected by moisture content and loading rate. Australian Journal of Crop Science, 5(10), 1239-1246.
Balasubramanian, S., and Viswanathan, R. (2010). Influence of moisture content on physical properties of minor millets. Journal of Food Science and Technology, 47(3), 275-280.
Bamrungwong, S., Satake, T., Vargas, D., and Yoshizaki, S. (1987). Fundamental studies on mechanical properties of long grain rice varieties: I compressive properties of long grain rice. Japanese Journal of Tropical Agriculture, 31(4), 232-240.
Bandumula, N. (2018). Rice production in Asia: Key to global food security. Proceedings of the National Academy of Sciences, India Section B: Biological Sciences, 88(4), 1323-1328.
Bhat, F. M., and Riar, C. S. (2016). Cultivars effect on the physical characteristics of rice (rough and milled)(Oryza Sativa L.) of temperate region of Kashmir (India). Journal of Food Science and Technology, 53(12), 4258-4269.
Blahovec, J. (2014). Role of water content in food and product texture. International Agrophysics, 21, 209-215.
Buggenhout, J., Brijs, K., Celus, I., and Delcour, J. A. (2013). The breakage susceptibility of raw and parboiled rice: A review. Journal of Food Engineering, 117(3), 304-315.
Burubai, W., Amula, E., Davies, R. M., Etekpe, G. W. W., and Daworiye, S.P. (2008). Determination of poisson’s’s ratio and elastic modulus of African nutmeg (Monodora myristica). International Agrophysics, 22, 99-102.
Chandio, F. A., Li, Y., Ma, Z., Ahmad, F., Syed, T. N., Shaikh, S. A, and Tunio, M. N. (2021). Influences of moisture content and compressive loading speed on the mechanical properties of maize grain orientations. International Journal of Agricultural and Biological Engineering, 14(5), 41–49.
Che, Q., Xu, P., Li, Z., Ma, W., and Yao, S. (2020). Crashworthiness analysis of a multi-layered bi-directionally corrugated steel plates structure. Science Progress, 103(3), 1-26.
Chigbo, E. O. J. (2016). Selected physical properties of soybean in relation to storage design. International Journal of Engineering Research and Applications, 6(2), 71-75.
Childs, N. W., and LeBeau, B. (2021/22). Rice import forecast lowered 2.0 million cwt. Rice Outlook: October 2021, RCS-21I, U.S. Department of Agriculture, Economic Research Service, 14, 1-15.
Correa, P. C., da Silva, F. S. Jaren, C., Junior, P. C. A., and Arana, I. (2007). Physical and mechanical properties in rice processing. Journal of Food Engineering, 79, 137-142.
Dash, B. S., Swain, S. K., Behera, D., Rayaguru, K., Meshram, M. (2021). Effect of moisture content on engineering properties of green gram for designing of agricultural equipment. Asian Journal of Dairy and Food Research, 41, 47-55.
Ding, S., Rotter, M., Ooi, J., Enstad, G., and Xu, D. (2013). Normal pressures and frictional tractions on shallow conical hopper walls after concentric filling: Predictions and experiments. Chemical Engineering Science, 89, 264-272.
Dong, R., Lu, Z., Liu, Z., Koide, S., and Cao, W. (2010). Effect of drying and tempering on rice fissuring analysed by integrating intra-kernel moisture distribution. Journal of Food Engineering, 97(2), 161-167.
Dunna, V., and Roy, B. (2013). Rice (Oryza sativa L.) breeding, biotechnology and seed production of field crops. Chapter, 4, 71-122.
El Fawal, Y. A., Tawfik, M. A., and El Shal, A. M. (2009). Study on physical and engineering properties for grains of some field crops. Misr Journal of Agricultural Engineering, 26(4), 1933-1951.
El Hamed, K. E. A. (2015). Variation for fruit morphological, chemical and seed physical traits in three Cucurbita pepo L. genotypes. Catrina, 14(1), 53-65.
Emadi, B., Khodabakhshian, R., Fard, M. H. A., and Sadrnia, H. (2011). Experimental comparison of applying different theories in elasticity for determination of the elasticity modulus of agricultural produce, pumpkin seed as a case study. Journal of Agricultural Technology. 7(6), 1495-1508.
Esa, N. M., Ling, T. B., and Loh Su Peng. (2013). By-products of rice processing: An overview of health benefits and applications. Journal of Rice Research: Open Access, 1(1), 1-11.
Etim, P. J., Alonge, A. F., and Akpan, G.E. (2021). Effect of moisture content on some mechanical and frictional properties of mucuna bean (Mucuna crens) relevant to its cracking. Agricultural Engineering International: CIGR Journal, 23(4), 265-273.
Fadeyibi, A., Lamidi, W. A., and Ademola, S. M. (2021). Engineering and proximate properties of miracle berry fruit (Synsepalum dulcificum L.). Agricultural Engineering International: CIGR Journal, 23(4), 227-235.
Feng, J., Wu, Z., Qi, D., Jin, Y., and Wu, W. (2019). Accurate measurements and establishment of a model of the mechanical properties of dried corn kernels. International Agrophysics, 33, 373-381.
Firouzi, S. (2014). Effect of pre-milling on milled rice breakage – a review. Thai Journal of Agricultural Science, 47(4), 241-250.
Fukugawa, N. K., and Ziska, L. H. (2019). Rice: Important for global nutrition. Journal of Nutritional Science and Vitaminology, 65, S2-S3.
Gierz, L., Kolankowska, E., Markowski, P., and Koszela, K. (2022). Measurements and analysis of the physical properties of cereal seeds depending on their moisture content to improve the accuracy of DEM simulation. Applied Sciences, 12(549), 1-15.
Glangchai, P., and Rangsri, W. (2021). Effects of pressure soaking on elastic modulus of steamed-cooked glutinous rice kernel. Trends in sciences, 18(22), 1-9.
Haq, R., Wani, M., and Prasad, K. (2016). Engineering properties of high and low altitude rice varieties from Kashmir valley at different processing levels. Cogent Food and Agriculture, 2(1133371), 1-11.
Horabik, J., and Molenda, M. (2014). Mechanical properties of granular materials and their impact on load distribution in silo: A review. Scientia Agriculturae Bohemica, 45(4), 203–211.
Hussein, N. (2017). Materials Science and Engineering. International Energy and Environment Foundation, 2017, 74-79.
Ikehashi, H. (2009). Why are there indica type and japonica type in rice? — history of the studies and a view for origin of two types. Rice Science, 16(1), 1-13.
Kenghe, R. N., Shirkole, S. S., and Nimkar, P. M. (2012). Effect of elevated moisture content on physical properties of soybean. Thai Journal of Agricultural Science, 45(3), 127-133.
Khan, M. J., Jovicic, V., Zbogar-Rasic, A., and Delgado, A. (2022). Enhancement of wheat flour and dough properties by non-thermal plasma treatment of wheat flour. Applied Sciences, 12(7997), 1-19.
Khodabakhshian, R., and Emadi, B. (2011). Determination of the modulus of elasticity in agricultural seeds on the basis of elasticity theory. Middle-East Journal of Scientific Research, 7(3), 367-373.
Kiani, M. K. D., Maghsoudi, H., and Minaei, S. (2009). Determination of Poisson’s ratio and young’s modulus of red bean grains. Journal of Food Process Engineering, 34(5), 1-11.
Kibar, H., and Öztürk, T. (2008). Physical and mechanical properties of soybean. International Agrophysics, 22, 239-244.
Kibar, H., Öztürk, T., and Esen, B. (2010). The effect of moisture content on physical and mechanical properties of rice (Oryza sativa L.). Spanish Journal of Agricultural Research, 8(3), 741-749.
Kibar, H., Öztürk, T., and Temizel, K. E. (2014). Effective engineering properties in the design of storage structures of post-harvest dry bean grain. Acta Scientiarum-Agronomy, 36(2), 147-158.
Klinkesorn, U., Sophanodora, P., Chinachoti, P., and McClements, D. J. (2004). Stability and rheology of corn oil-in-water emulsions containing maltodextrin. Food Research International, 37(9), 851-859.
Kumar S., Sangwan P., Dhankhar R. M. V., and Bidra S. (2013). Utilization of rice husk and their ash: A review. Research Journal of Chemical and Environmental Sciences, 1(5), 126-129.
Lin, H. I., Yu, Y. Y., Wen, F. I., and Liu, P. T. (2022). Status of food security in east and southeast asia and challenges of climate change. Climate, 10(40), 1-35.
Lisboa, C. F., De Araújo, R. S. L., Teixeira, I. R., Mota, J. H., Da Silva, A. G., De Araújo, M. E. V., Silva, D. D. A., França, E. E., Silva, I. L., and De Camargo, F. R. T. (2017). Influence of water content on the quality of pigeonpea seeds. American Journal of Plant Sciences, 8, 2397-2406.
Liu, J., Yuan, T., Wang, R., Liu, Y., and Fang, G. (2019. The properties and tortilla making of corn flour from enzymatic wet-milling. Molecules, 24(2137), 1-16.
Logo, B. A., and Vásárhelyi, B. (2020). Parametric study on the connection between Poisson’s’s ratio, GSI and environmental stress. Cames, 27(2-3), 205-217.
Londo, J. P., Chiang, Y. C., Hung, K. H., Chiang, T. Y., and Schaal, B. A. (2006). Phylogeography of Asian wild rice, Oryza rufipogon, reveals multiple independent domestications of cultivated rice, Oryza sativa. Proceedings of the National Academy of Sciences, 103(25), 9578-9583.
Maksoud, M. A. F. A. (2013). Mechanical properties of corn kernels. Misr Journal of Agricultural Engineering, 26(4), 1901- 1922.
Martelo, J. B., Andersson, M., Liguori, C., and Lundgren, J. (2021). Three-dimensional scanning electron microscopy used as a profilometer for the surface characterization of polyethylene-coated paperboard. Nordic Pulp and Paper Research Journal, 36(2), 276-283.
Mir, S. A., Bosco, S. J. D., and Sunooj, K. V. (2013). Evaluation of physical properties of rice cultivars grown in the temperate region of India. International Food Research Journal, 20(4), 1521-1527.
Mohite, A. M., Sharma, N., and Mishra, A. (2019). Influence of different moisture content on engineering properties of tamarind seeds. Agricultural Engineering International: CIGR Journal, 21(1), 220-224.
Molenda, M., and Stasiak, M. (2002). Determination of the elastic constants of cereal grains in a uniaxial compression test. International Agrophysics, 16, 61-65.
Morishita, T., Fumoto, N., Yoshizawa, T., and Kagawa, K. (1987). Varietal differences in cadmium levels of rice grains of Japonica, Indica, Javanica, and hybrid varieties produced in the same plot of a field. Soil Science and Plant Nutrition, 33(4), 629-637.
Moya, M., Aguado, P. J., and Ayuga, F. (2013). Mechanical properties of some granular agricultural materials used in silo design. International Agrophysics, 27, 181-193.
Muthayya, S., Sugimoto, J. D., Montgomery, S., and Maberly, G. F. (2014). An overview of global rice production, supply, trade, and consumption. Annals of the New York Academy of Sciences, 1324, 7–14.
Nandiyanto, A. B. D., Oktiani, R., and Ragadhita, R. (2019). How to read and interpret FTIR Spectroscope of organic material. Journal of Science and Technology, 4(1), 97-118.
Nasirahmadi, A., Fard, M. H. A., Emadi, B., and Khazaei, N. B. (2014). Modelling and analysis of compressive strength properties of parboiled paddy and milled rice. International Agrophysics, 28, 73-83.
Neto, J. P. L., Nascimento, J. W. B. D., Marques, J. I., and Costa, C. A. D. (2016). Mechanical properties of grain in silos for simulation designs. Journal of the Brazilian Association of Agricultural Engineering, 36(4), 573-580.
Normita, M., and Cruz, D. (2002). Rice grain quality evaluation procedures. Graham R. A Proposal for IRRI to establish a grain quality and nutrition research centre: IRRI discussion paper series, 44, 7-12.
Nueva, J., Tanaleon, J. A., and Besa, A. (2022). Rice tariffication law: Education and views of farmers in the southern Philippines. ASEAN Journal of Science and Engineering Education, 2(2), 143-146.
Nurjamil, A. M., Wolio, N. A., Laila, R. N., Rohmah, S. A., Nandiyanto, A. B. D., Anggraeni, S., and Kurniawan, T. (2021). Eco-friendly batteries from rice husks and wood grain. ASEAN Journal of Science and Engineering, 1(1), 45-48.
Nyorere, O., and Uguru, H. (2018). Effect of loading rate and moisture content on the fracture resistance of beechwood (Gmelina arborea) seed. Journal of Applied Science and Environmental Management, 22(10), 1609-1613.
Obinna, E. M. (2022). Physicochemical properties of human hair using Fourier Transform Infra-Red (FTIR) and scanning electron microscope (SEM). ASEAN Journal for Science and Engineering in Materials, 1(2), 71-74.
Öztürk, T., and Esen, B. (2013). Physical and mechanical properties of some hybrid corn varieties. International Journal of Agricultural and Biological Engineering, 6(1), 111-116.
Panhwar, T., Mahesar, S. A., Kandhro, A. A., Sheerazi, S. T. H , Kori, A. H., Laghari, Z. H., Memon, J. R. (2019). Physicochemical composition and FTIR characterization of castor seed oil. Ukrainian Food Journal, 8(4), 778-787.
Parnsakhorn, S., and Noomhorm, A. (2008). Changes in physicochemical properties of parboiled brown rice during heat treatment. Agricultural Engineering International: the CIGR E-Journal, 2008, 1-20.
Resende, O., Correa, P. C., de Oliveirac, G. H. H., Goneli, A. L. D., and Jaren, C. (2013). Mechanical properties of rough and dehulled rice during drying. International Journal of Food Studies, 2, 158–166.
Rodrigues, G. B., Resende, O., de Oliveira, D. E. C., Silva, L. C. M., and Junior, W. N. F. (2019). Mechanical properties of grains sorghum subjected to compression at different moisture contents. Journal of Agricultural Science, 11(4), 279-287.
Rosli, W. I. W., and Ain, I. N. (2014). Morphological characterizations of selected brown rice commercially available in east coast of peninsular Malaysia. Annals of Microscopy, 14, 1-17.
Sá, N. D., Wenneck, G. S., and Saath, R. (2020). Peanut storage with different water content conditions. International Research Journal of Advanced Engineering and Science, 6(1), 1-4.
Sarker, M. S. H., Hasan, S. M. K., Ibrahim, M. N., Aziz, N. A., and Punan, M. S. (2017). Mechanical property and quality aspects of rice dried in industrial dryers. Journal of Food Science and Technology, 54(12), 1-6.
Sarnavi, H. J., Mohammadi, A. N., Motlagh, A. M., and Didar, A. R. (2013). DEM model of wheat grains in storage considering the effect of moisture content in direct shear test. Research Journal of Applied Sciences, Engineering and Technology, 5(3), 829-841.
Segal, R., and Minh, L. N. (2019). Unfair harvest-The state of rice in Asia. Oxfam GB for Oxfam International, 2019, 1-32.
Seifi, M. R., and Alimardani, R. (2010). The moisture content effect on some physical and mechanical properties of corn (Sc 704). Journal of Agricultural Science, 2(4), 125-134.
Shakri, A. N. N., Kasim, K. F., and Rukunudin, I. B. (2020). Chemical compositions and physical properties of selected Malaysian rice: A review. IOP Conference Series: Earth and Environmental Science, 765, 1-6.
Sharma, K., and Kumar, D. (2017). Elastoplastic stability and failure analysis of FGM plate with temperature dependent material properties under thermomechanical loading. Latin American Journal of Solids and Structures, 14, 1-26.
Shitanda, D., Nishiyama, Y., and Koide, S. (2002). Compressive strength properties of rough rice considering variation of contact area. Journal of Food Engineering, 53, 53–58.
Soyoye, B. O., Ademosun, O. C., Agbetoye, L. A. S. (2018). Determination of some physical and mechanical properties of soybean and maize in relation to planter design. Agricultural Engineering International: CIGR Journal, 18(1), 82-89.
Stasiak, M., Molenda, M., Opaliński, I., and Błaszczak, W. (2013). Mechanical properties of native maize, wheat, and potato starches. Czech Journal of Food Sciences, 31(4), 347–354.
Sukamto, S., and Rahmat, A. (2023). Evaluation of FTIR, macro and micronutrients of compost from black soldier fly residual: In context of its use as fertilizer. ASEAN Journal of Science and Engineering, 3(1), 21-30.
Tamura, M., Singh, J., Kumagai, C., Kaur, L., and Ogawa, Y. (2021). Cooking of short, medium and long-grain rice in limited and excess water: Effects on microstructural characteristics and gastro-small intestinal starch digestion in vitro. Food Science and Technology, 146(111379), 1-9.
Tchuisse, M. N., Tekeu, H., Ngonkeu, E. L. M., Malaa, D. K., Mballa, T., Boudjeko, T., Hubert, J., Galani, Y., and Nji, A. (2019). Grain morphological characterization and protein content of sixty-eight local rice (Oryza sativa L) cultivars from Cameroon. African Journal of Plant Science, 14(1), 24-35.
Tengen, T. B., Wejrzanowski, T., and Kurzydlowski, K. J. (2008). The effect of grain size distribution on the mechanical properties of nanometals. Solid State Phenomema, 140, 185-190.
Thakur, A., Vaidya, D., Kaushal, M., Gupta, A., and Verma, A. (2019). Physicochemical properties, FTIR spectra, scanning electron microscopy and functional properties of protein isolate produced from wild apricot kernel press cake. International Journal of Scientific and Engineering Research, 10(9), 318-328.
Thakur, A., Vaidya, D., Kaushal, M., Gupta, A., and Verma, A. (2019). Physicochemical properties, FTIR spectra, scanning electron microscopy and functional properties of protein isolate produced from wild apricot kernel press cake. International Journal of Scientific and Engineering Research, 10(9), 219-328.
Vega-Rojas, L. J., Padilla, M. C., Londoño, N. R., López, A .D. R., Garcia, R. M. L., Rojas, N. P., and Garcia, M. E. R. (2016). The effect of maize grain size on the physicochemical properties of isolated starch, crude maize flour and nixtamalized maize flours. Agricultural Sciences, 7, 114-125.
Voicu, G., Ungureanu, N., Tudosie (Stefan), E. M., and Constantin, G. A. (2013). Some mechanical characteristics of wheat seeds obtained by uniaxial compression tests. U.P.B. Scientific Bulletin, Series D: Mechanical Engineering, 75(4), 265-278.
Wang, B., and Wang, J. (2019). Mechanical properties of maize kernel horny endosperm, floury endosperm and germ. International Journal of Food Properties, 22(1), 863-877.
Wang, C. H., Zheng, X. M., Xu, Q., Yuan, X. P., Huang, L., Zhou, H. F., Wei, X. H., and Ge, S. (2014). Genetic diversity and classification of Oryza sativa with emphasis on Chinese rice germplasm. Heredity, 112, 489-496.
Wasala, W. M. C. B., Dharmasena, D. A. N., Dissanayake, T. M. R., and Thilakarathne, B. M. K. S. (2012). Physical and mechanical properties of three commercially grown banana (Musa acuminata Colla) cultivars in Sri Lanka. Tropical Agricultural Research, 24(1), 42-53.
Wulandari, A. E., Kusumawardani, S. M., Sabrina, M. A., Arofah, S., Sholihat, S. N. S., Rusdiana, D., Suwandi, T., and Aziz, M. (2021). Design of rice husks gasification stove. ASEAN Journal of Science and Engineering, 1(1), 1-8.
Yolanda, Y. D., and Nandiyanto, A. B. D. (2022). How to read and calculate diameter size from electron microscopy images. ASEAN Journal of Science and Engineering Education, 2(1), 11-36.
Yu, Q., Liang, J., Li, Q., and Li, C. (2021). Development of measurement equipment and experimental and numerical simulation studies for warm forming limits of high-strength steel. Materials, 14(2373), 1-15.
Zareiforoush, H., Komarizadeh, M. H., Alizadeh, M. R., Tavakoli, H., and Masoumi M. (2012). Effects of moisture content, loading rate, and grain orientation on fracture resistance of paddy (Oryza sativa L.) grain. International Journal of Food Properties, 15, 89-98.
Zareiforoush, H., Komarizadeh, M. H., and Alizadeh, M. R. (2009). Effect of moisture content on some physical properties of paddy grains. Research Journal of Applied Sciences, Engineering and Technology, 1(3), 132-139.
Zuomei, Y., Jingxin, S., and Yuming, G. (2015). Effect of moisture content on compression mechanical properties and frictional characteristics of millet grain. Transaction of the Chinese Society of Agricultural Engineering, 31(23), 253-260.
DOI: https://doi.org/10.17509/ijost.v7i2.50887
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Universitas Pendidikan Indonesia
![Creative Commons License](http://licensebuttons.net/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Indonesian Journal of Science and Technology is published by UPI.
View My Stats