Piezoelectric Mat as Door Bell

Genta Yuandhana, Kania Lisdiana, Rizal Haidar Ghifari, Syifa Nur Shadrina, Dadi Rusdiana, Tri Suwandi

Abstract


Ecological Crisis is a change in world weather which is getting warmer due to the accumulation of CO2 gas in the atmosphere. Burning rock coal which is a source of electricity generation, is a contributor to the effects of the ecological crisis in the world. This caused the world needs new energy sources, such as piezoelectric, etc. The manufacture of piezoelectric mats as house bells aims to show that there is alternative energy for power generation in order to reduce the use of coal in Indonesia. By reducing the use of coal, it will reduce the occurrence of an ecological crisis. The research method we used was an experiment with planning, design and implementation stages. The renewal of this project is to assemble and apply the piezoelectric directly to objects that require electrical energy by replacing the power source from the piezoelectric system, and implementing it for house bells. Piezoelectric mat is a mat that can generate electrical energy if the surface is pressed. This energy can be generated from the piezoelectric that is installed on the inside of the mat. Piezo mats will be installed to be stepped on by guests visiting a house. This foot step will put pressure on the mat. The more tread is obtained, the more electricity is generated. This piezo carpet will be installed in front of the house. The use of piezo mats is an effort to utilize mechanical energy in the form of pressure generated by footrests into electrical energy.

Keywords


Ecological crisis, Piezoelectric. Converting energy

Full Text:

PDF

References


Bae, G., Jang, D., and Jeon, S. (2021). Scalable fabrication of high-performance thin-shell oxide nanoarchitected materials via proximity-field nanopatterning. ACS Nano, 15(3), 3960-3970.

Bamberry, J. (2010). Blackout: coal, climate and the last energy crisis [Book Review]. Australasian Journal of Environmental Management, 17(1), 53.

Chen, J., Qiu, Q., Han, Y., and Lau, D. (2019). Piezoelectric materials for sustainable building structures: fundamentals and applications. Renewable and Sustainable Energy Reviews, 101, 14-25.

Chen, N., Jung, H. J., Jabbar, H., Sung, T. H., and Wei, T. (2017). A piezoelectric impact-induced vibration cantilever energy harvester from speed bump with a low-power power management circuit. Sensors and Actuators A: Physical, 254, 134-144.

Esmaeeli, R., Aliniagerdroudbari, H., Hashemi, S. R., Alhadri, M., Zakri, W., Batur, C., and Farhad, S. (2019). Design, modeling, and analysis of a high performance piezoelectric energy harvester for intelligent tires. International Journal of Energy Research, 43(10), 5199-5212.

Fu, J., Hou, Y., Gao, X., Zheng, M., and Zhu, M. (2018). Highly durable piezoelectric energy harvester based on a PVDF flexible nanocomposite filled with oriented BaTi2O5 nanorods with high power density. Nano Energy, 52, 391-401.

Gonzalez-Lagunas, J. (2017). Is the piezoelectric device the new standard for facial osteotomies?. Journal of stomatology, oral and maxillofacial surgery, 118(4), 255-258.

Howells, C. A. (2009). Piezoelectric energy harvesting. Energy Conversion and Management, 50(7), 1847-1850.

Walubita, L. F., Sohoulande Djebou, D. C., Faruk, A. N., Lee, S. I., Dessouky, S., and Hu, X. (2018). Prospective of societal and environmental benefits of piezoelectric technology in road energy harvesting. Sustainability, 10(2), 383.




DOI: https://doi.org/10.17509/ijomr.v1i1.33788

Refbacks

  • There are currently no refbacks.


Copyright (c) 1970 Kantor Jurnal dan Publikasi, Universitas Pendidikan Indonesia (UPI)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

View My Stats

Indonesian Journal of Multidiciplinary Research (IJOMR) is published by Universitas Pendidikan Indonesia (UPI)